All insights

blog

Above-ground or mounded: choosing an LPG bulk storage arrangement

12 September 2026

Above-ground or mounded: choosing an LPG bulk storage arrangement

Safety distances, land take, capital cost and long-term inspection burden all shift depending on how the vessel is installed. Here is how we make the call.

The vessel is usually the largest single line in an LPG storage budget, but the arrangement around it decides how much land the installation consumes and how much it costs to maintain for the next twenty years.

Above-ground vessels
The default for most commercial and industrial sites. The vessel sits on saddles on a reinforced plinth, fully visible, with clear separation distances to boundaries, buildings, ignition sources and traffic routes. External inspection is straightforward, corrosion is visible, and repairs are accessible. The trade-off is land: separation distances are measured from the vessel shell, and on a constrained urban plot those distances are often what rules the option out.

Mounded vessels
The vessel is covered with an engineered mound of inert material. Because the shell is protected from radiant heat and impact, the required separation distances reduce substantially, which can make a bulk installation viable on a site where an above-ground vessel simply does not fit. Mounding also removes the vessel as a visual and security consideration.

The cost is in what you cannot see. Cathodic protection, coating integrity, drainage and a documented inspection regime all become permanent obligations, and internal inspection access must be designed in from the beginning. Capital cost is higher, and remedial work later is significantly more disruptive than on an above-ground installation.

How we decide
We start with the site, not the vessel. Available land and boundary conditions, the required capacity from actual demand modelling rather than a round number, tanker access and turning, fire water provision, and the client's appetite for a long-term inspection programme. On most commercial sites above-ground is the correct answer. Mounded earns its extra cost where land is genuinely the binding constraint or where the installation sits close to occupied buildings.

Capacity is worth getting right in the same exercise. Oversizing wastes capital and slows product turnover; undersizing turns refill logistics into a weekly emergency. Both are avoidable with a demand study before procurement.